Electric Loco - recommendations please

A place for discussing battery-electric locomotives, whether they're diesel, steam or even electric outline
Post Reply
SapperAnt

Electric Loco - recommendations please

Post by SapperAnt » Thu Jun 06, 2013 5:00 pm

Since re-discovering the joys of "instant" trains via my N-Gauge (which my kitten thinks was laid especially for him to play with ......) I am looking for a similar "put on track and go" easy train to potter around my track with out the faff if a live steamer.

Ive a budget of around £100

I am looking at a Triang Big Big shunter. And the old lady who gave me her track may have a Big Big something.

Thoughts please!

LnBmad

Post by LnBmad » Thu Jun 06, 2013 7:08 pm

Do u prefer diesels or steam?

SapperAnt

Post by SapperAnt » Thu Jun 06, 2013 7:19 pm

Steam but this would be Diesel outline.

User avatar
AndrewGVT
Cleaner
Cleaner
Posts: 54
Joined: Tue May 21, 2013 7:45 pm
Location: Hampshire
Contact:

Post by AndrewGVT » Thu Jun 06, 2013 7:25 pm

Hi
If your not to bothered with detail then a old rechargeable (the new batteries drain very quickly) playmobil loco would be a possible. They can be expensive but I'm sure ebay mite be able to help.
Andrew
=============
Proper engineering techniques; use a hammer, if that fails, get a bigger hammer.

LnBmad

Post by LnBmad » Thu Jun 06, 2013 8:01 pm

See if you can find a bachmann lyn? I just picked on up to convert to sm32 for £100

MDLR

Post by MDLR » Fri Jun 07, 2013 12:11 am

If you don't object to building a kit, there are any number of cheapo kits around - the IP Engineering EZee range and the Busted Bricks loco both come to mind - they're only around the £30-£40 mark, they're not that difficult to build and will repay a little extra added detailing.

You'll even have enough left in the budget to buy some stock, too!

User avatar
williamfj
Trainee Driver
Trainee Driver
Posts: 605
Joined: Sat Nov 20, 2010 9:20 pm
Location: York

Post by williamfj » Fri Jun 07, 2013 12:42 am

If you're open to building a kit I'd recommend an AnDel Ffion, easy to build, complete with all you need and under £100. Mine has had some problems, due to my incompetence I hasten to add. But it is still going strong and I dare say with an IPE basic chassis it's a bit stronger.

SapperAnt

Post by SapperAnt » Fri Jun 07, 2013 1:22 pm

Oooh. I'll have to have another look at the AnDel website

Given the amount of WD stock I have I was thinking of a plasticard armoured Simplex body over a commercial chassis. Any thoughts?

SapperAnt

Post by SapperAnt » Sat Jun 15, 2013 10:48 am

After having had a partial shed-quake and various items in my shed falling off the shelves...

I am tempted to convert a now rather battered Andel brake van into an early "Flying Shed" type diesel. Make the verandah into the driving cab; put a radiator on that end and exhaust and silencer etc on the roof.

Now: what chassis to use?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest