A tiny G gauge indoor layout
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
A tiny G gauge indoor layout
Three years ago I started this topic on my dreaming of a small indoor G layout.
https://gardenrails.org/viewtopic.php?f=25&t=12349
I tested and proved that I could run my smaller ‘outdoor’ locos on 12 INCH radius curves, and I could build an 8” long rotating turnout to save space. This old video explains.
https://www.youtube.com/watch?v=gQxV7HT_bN0
After three terrible years, while I cared for my wife, I can now make a start.
And now that Sydney has had 6 months of almost daily rain, with little chance to run trains outside, an indoor line has even more appeal.
So I resurrected the plans for the pottery 'studio' layout and started ripping out all the shelving that Pauline and I had erected 20 years ago, to store all her clay, glazes and pots.
Now it will house the Clay Mine Branch of the Sandstone and Termite.
I wanted more than an Industrial / shunting layout - there had to be somewhere for trains to go to, and come from.
Even though it is a small space (about 6' x 8') I wanted to use my existing G trains - my shorter locos and wagons - max 8" long with 4" wheelbase. The locos are all battery+RC.
Trains will have a maximum length of three of my existing 8” long wagons!
Here’s the plan You can see there are two stations more or less above one another with a height difference of 10" – the plan shows them separated for clarity.
And they are joined by a steep, curving line with a semicircle of 12" radius on a 1:18 grade. The 'straighter' parts of the line are on grades between 1:11 and 1:14.
to be continued as construction continues...
https://gardenrails.org/viewtopic.php?f=25&t=12349
I tested and proved that I could run my smaller ‘outdoor’ locos on 12 INCH radius curves, and I could build an 8” long rotating turnout to save space. This old video explains.
https://www.youtube.com/watch?v=gQxV7HT_bN0
After three terrible years, while I cared for my wife, I can now make a start.
And now that Sydney has had 6 months of almost daily rain, with little chance to run trains outside, an indoor line has even more appeal.
So I resurrected the plans for the pottery 'studio' layout and started ripping out all the shelving that Pauline and I had erected 20 years ago, to store all her clay, glazes and pots.
Now it will house the Clay Mine Branch of the Sandstone and Termite.
I wanted more than an Industrial / shunting layout - there had to be somewhere for trains to go to, and come from.
Even though it is a small space (about 6' x 8') I wanted to use my existing G trains - my shorter locos and wagons - max 8" long with 4" wheelbase. The locos are all battery+RC.
Trains will have a maximum length of three of my existing 8” long wagons!
Here’s the plan You can see there are two stations more or less above one another with a height difference of 10" – the plan shows them separated for clarity.
And they are joined by a steep, curving line with a semicircle of 12" radius on a 1:18 grade. The 'straighter' parts of the line are on grades between 1:11 and 1:14.
to be continued as construction continues...
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
Re: A tiny G gauge indoor layout
Hi Greg,
It's good to see you feel able to start a new project.
This is looking very interesting and I'm looking forward to watching progress.
It's good to see you feel able to start a new project.
This is looking very interesting and I'm looking forward to watching progress.
Philip
Re: A tiny G gauge indoor layout
Great to see how much progress is being made in such a short time. I have always been impressed with your swivelling turnouts and this layout is clearly going to make the most of them.
Looking forward to the next update.
Rik
Looking forward to the next update.
Rik
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: A tiny G gauge indoor layout
Thank you Philip.
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: A tiny G gauge indoor layout
Claymine station – the upper level
Tracklaying is complete at the upper level - I used lots of plastic track from cheap 'christmas train sets' where possible – these are 2’ radius. The crux of the whole small layout idea, allowing space saving, is the 'circular turnout' which I have devised. Instead of a 'normal' turnout 30cm long and needing say 3 of them in series taking a metre or so, this circular turnout is just 20cm long and allows up to 6 lines to radiate from it. BUT it is very finicky to build and install !!
I made the two of them on 7mm thick ply using plastic RAILS (not plastic track) epoxied to the wood. They are VERY finicky to make - all 4 ends must have EXACTLY the same gauge and make EXACTLY the same angles at the perimeter. And be all the SAME length to allow it to turn without binding. Using plastic rails made it a lot easier to do these adjustments - a dremel with cutoff disk! (the plastic rails came from TrainLi USA.)
Where I have to use curves less than 2' radius, I am making the track from brass rail (and to 46mm gauge) nailed to timber sleepers as I did outside, or LGB track.
The upper station has a main+loop and two sidings. One of these will be a 'clay mine', and the other a goods shed. In memory of Pauline and her pottery hobby, the clay will be transported downhill to the pottery factory at the lower station. This picture shows the plan and the actual build.
This is a link to a video showing some testing: https://youtu.be/U7_h70yw74Y
Now to start work on the track down to the lower level...................
Tracklaying is complete at the upper level - I used lots of plastic track from cheap 'christmas train sets' where possible – these are 2’ radius. The crux of the whole small layout idea, allowing space saving, is the 'circular turnout' which I have devised. Instead of a 'normal' turnout 30cm long and needing say 3 of them in series taking a metre or so, this circular turnout is just 20cm long and allows up to 6 lines to radiate from it. BUT it is very finicky to build and install !!
I made the two of them on 7mm thick ply using plastic RAILS (not plastic track) epoxied to the wood. They are VERY finicky to make - all 4 ends must have EXACTLY the same gauge and make EXACTLY the same angles at the perimeter. And be all the SAME length to allow it to turn without binding. Using plastic rails made it a lot easier to do these adjustments - a dremel with cutoff disk! (the plastic rails came from TrainLi USA.)
Where I have to use curves less than 2' radius, I am making the track from brass rail (and to 46mm gauge) nailed to timber sleepers as I did outside, or LGB track.
The upper station has a main+loop and two sidings. One of these will be a 'clay mine', and the other a goods shed. In memory of Pauline and her pottery hobby, the clay will be transported downhill to the pottery factory at the lower station. This picture shows the plan and the actual build.
This is a link to a video showing some testing: https://youtu.be/U7_h70yw74Y
Now to start work on the track down to the lower level...................
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
Re: A tiny G gauge indoor layout
The video is fascinating. The early shot pushing wagons into the clay siding is amazing but a bit heart in mouth though!
Philip
Re: A tiny G gauge indoor layout
Very imaginative use of a tight space, Greg. I would never have thought of creating a double decker layout with so small a footprint. Those swivelling points are certainly space savers - and quite ingenious
Rik
Rik
Re: A tiny G gauge indoor layout
I thought I'd see if anything like your turnouts exist(ed) in the real world. This was the nearest I could find. A dual gauge straight and curved turntable on a miniature railway in Brussels
Rik
- GAP
- Trainee Driver
- Posts: 694
- Joined: Sun Dec 23, 2012 10:34 pm
- Location: Bundaberg QLD Australia
- Contact:
Re: A tiny G gauge indoor layout
That looks great Greg
Some inspiration for my storage tracks under my HO layout future build
Some inspiration for my storage tracks under my HO layout future build
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: A tiny G gauge indoor layout
Amazing. Really just a turntable as most of the tracks could not be lined up for 'through' running. But I wonder why they even bothered with the curved track.
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
Re: A tiny G gauge indoor layout
I think it probably evolved over time?
The curved route being a later addition..
Though I could envisage a through-route, using the curve, to the tracks to the right of the sheds?
Phil.P
The curved route being a later addition..
Though I could envisage a through-route, using the curve, to the tracks to the right of the sheds?
Phil.P
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: A tiny G gauge indoor layout
Part 3
The upper to lower level connecting track
This section is just 13’ of track long and rises 10 1/2” from the lower station. It is VERY steep and sharp curves, but it will let me do some scenery of mountains and tunnels etc. Maybe even a high trestle bridge.
For the 12" radius semicircle I used aluminum bar for the rail as it was easier to bend to such a sharp curve. (I used this method of making track when I first started outdoors.)
Vaseline is used to lubricate the inner parts of the rail heads!
I originally ‘designed’ the grades to be 1:16 on the semicircle and 1:14 on the straighter bits. But due to some miscalculation or mis-measurement by ‘someone who shall remain nameless’, I finished up with 1:18 on the semicircle and 1:11 on a 16” radius curve.
That is the new Ruling Grade and is the left end in this pic...
One of the small locos I plan to use can handle 3 wagons on that grade but the other loco can only do two. Will make for more interesting operations!
Here's the link showing a test train: https://youtu.be/UlKOfV2FODQ
The upper to lower level connecting track
This section is just 13’ of track long and rises 10 1/2” from the lower station. It is VERY steep and sharp curves, but it will let me do some scenery of mountains and tunnels etc. Maybe even a high trestle bridge.
For the 12" radius semicircle I used aluminum bar for the rail as it was easier to bend to such a sharp curve. (I used this method of making track when I first started outdoors.)
Vaseline is used to lubricate the inner parts of the rail heads!
I originally ‘designed’ the grades to be 1:16 on the semicircle and 1:14 on the straighter bits. But due to some miscalculation or mis-measurement by ‘someone who shall remain nameless’, I finished up with 1:18 on the semicircle and 1:11 on a 16” radius curve.
That is the new Ruling Grade and is the left end in this pic...
One of the small locos I plan to use can handle 3 wagons on that grade but the other loco can only do two. Will make for more interesting operations!
Here's the link showing a test train: https://youtu.be/UlKOfV2FODQ
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
Re: A tiny G gauge indoor layout
Just catching up with this thread - I love it!
It's going to look great once the scenery starts to go in. And that circular point is SO ingenious...
It's going to look great once the scenery starts to go in. And that circular point is SO ingenious...
Re: A tiny G gauge indoor layout
Love the video. There's an element of tension and jeopardy as the loco climbs .......
It'll be fun to run trains on wet days - of which you seem to have had more than your fair share recently!!
Rik
It'll be fun to run trains on wet days - of which you seem to have had more than your fair share recently!!
Rik
- GAP
- Trainee Driver
- Posts: 694
- Joined: Sun Dec 23, 2012 10:34 pm
- Location: Bundaberg QLD Australia
- Contact:
Re: A tiny G gauge indoor layout
That looks great there Greg.
This may give you some ideas on how to do mountains in a corner.
https://ringbalin.blogspot.com/p/about-railway.html
I am starting to do a background similar to the one on here down my back fence to hide it.
I will use poly styrene foam and acrylic concrete render to cover it the same as I did here.
This may give you some ideas on how to do mountains in a corner.
https://ringbalin.blogspot.com/p/about-railway.html
I am starting to do a background similar to the one on here down my back fence to hide it.
I will use poly styrene foam and acrylic concrete render to cover it the same as I did here.
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: A tiny G gauge indoor layout
Thanks Graeme. Using foam rubber is a new idea to me. I have been trawling the web for scenery making ideas. Not a lot has changed in 30 years since I built my N gauge scenery from chicken wire and plaster soaked paper. Some new use of expanding foam but that seems expensive to me.GAP wrote: ↑Mon Nov 14, 2022 9:05 pm That looks great there Greg.
This may give you some ideas on how to do mountains in a corner.
https://ringbalin.blogspot.com/p/about-railway.html
I am starting to do a background similar to the one on here down my back fence to hide it.
I will use poly styrene foam and acrylic concrete render to cover it the same as I did here.
I've started collecting big cardboard boxes and polystyrene foam. I'll need to make 7 tunnel portals too!
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
- GAP
- Trainee Driver
- Posts: 694
- Joined: Sun Dec 23, 2012 10:34 pm
- Location: Bundaberg QLD Australia
- Contact:
Re: A tiny G gauge indoor layout
Greg,gregh wrote: ↑Wed Nov 16, 2022 2:43 amThanks Graeme. Using foam rubber is a new idea to me. I have been trawling the web for scenery making ideas. Not a lot has changed in 30 years since I built my N gauge scenery from chicken wire and plaster soaked paper. Some new use of expanding foam but that seems expensive to me.GAP wrote: ↑Mon Nov 14, 2022 9:05 pm That looks great there Greg.
This may give you some ideas on how to do mountains in a corner.
https://ringbalin.blogspot.com/p/about-railway.html
I am starting to do a background similar to the one on here down my back fence to hide it.
I will use poly styrene foam and acrylic concrete render to cover it the same as I did here.
I've started collecting big cardboard boxes and polystyrene foam. I'll need to make 7 tunnel portals too!
The acrylic render from Bunnings is only $14, it goes for miles
https://www.bunnings.com.au/dunlop-20kg ... r_p0760242
The play sand also from Bunnings is $7-8
https://www.bunnings.com.au/richgro-20k ... d_p3022506
I look the cheapest white acrylic paint I can get and tint it with those artist's paints from the $2 shops, that is what the backdrop is done with.
I'm starting one to hide the fence across the back of my G scale layout.
I also look for mistints, of a colour I can use, in the paint dept and can get tins for about 1/2 price.
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
- gregh
- Trainee Driver
- Posts: 576
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: A tiny G gauge indoor layout
Thanks for those hints and links Graeme. Will check them out.
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
- GAP
- Trainee Driver
- Posts: 694
- Joined: Sun Dec 23, 2012 10:34 pm
- Location: Bundaberg QLD Australia
- Contact:
Re: A tiny G gauge indoor layout
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html
Who is online
Users browsing this forum: Phil.P and 0 guests