Compton Down Merges with Llechfan

Anything related to the garden railway world that is not catered for in another board
MuzTrem

Post by MuzTrem » Tue Apr 20, 2010 7:49 pm

On my first visit to a garden meeting I managed to break the host's new lifting bridge, because I didn't understand how it worked and tried to lift it the wrong way :oops: Fortunately it was repaired in about five minutes, but it was still quite embarassing!

MoelygestLR

Post by MoelygestLR » Tue Apr 20, 2010 8:15 pm

at least you never completely destroyed a brand new signal box that had only just been finished :oops: :oops:

taliesin001

Post by taliesin001 » Tue Apr 20, 2010 8:32 pm

I never done anything like as bad as some of these stories, but I did drive a loco through the back of an engine shed. Technically though it wasn't my fault as when the loco went in the radio lost signal and the regulator didn't close!

kes

Re: Compton Down Merges with Llechfan

Post by kes » Tue Apr 20, 2010 9:56 pm

hussra wrote:
kes wrote:Details of Llechfan running days will start to appear on their website soon as will news of the move.
Sounds good, will get the details on the LlGR web site as soon as I receive them... Just spotted the 2010 open day info on the Association web site, so I can copy the dates from there I guess.

Llechfan Garden Railway webmaster
Hello Richard in Sunny Solihull - was staying up there for Stoneleigh weekend! it was very sunny. Great to hear from you here - will be fantastic to see news on Llechfan site - 'tis a thing of beauty that one ;) Think Steve & the gang hoping to come up with some info to sling in your direction soon, looking forward to getting some weekends in meself :D ..... and haven't caused any major crashes there yet - have run in both directions - but did manage to tip over borrowed rake of coaches in spectacular fashion - and had various chilled engines rescued from dotted points about the line :oops:

User avatar
hussra
Trainee Driver
Trainee Driver
Posts: 872
Joined: Tue Jul 28, 2009 2:06 pm

Re: Compton Down Merges with Llechfan

Post by hussra » Wed Apr 21, 2010 10:19 pm

kes wrote:Hello Richard in Sunny Solihull - was staying up there for Stoneleigh weekend! it was very sunny. Great to hear from you here - will be fantastic to see news on Llechfan site - 'tis a thing of beauty that one ;)  Think Steve & the gang hoping to come up with some info to sling in your direction soon, looking forward to getting some weekends in meself :D .....
Excellent, look forward to it.

Sunny in Solihull again today, spent some time contemplating the rhubarb patch with a view to (1) figuring out how to get the line to negotiate it safely, and (2) assessing future requirements for bolster wagons.

Richard
Richard Huss
in sunny Solihull

Pendo Pilot

Post by Pendo Pilot » Wed Apr 21, 2010 10:30 pm

taliesin001 wrote: but I did drive a loco through the back of an engine shed. Technically though it wasn't my fault as when the loco went in the radio lost signal and the regulator didn't close!
Nice one, a proper whoops moment. But to quote BR rule no 1985, you are not a proper railwayman until you derail/crash something.
:oops:

SillyBilly

Post by SillyBilly » Wed Apr 21, 2010 10:40 pm

Pendo Pilot wrote:But to quote BR rule no 1985, you are not a proper railwayman until you derail/crash something.
:oops:
I crashed on my first day.

MoelygestLR

Post by MoelygestLR » Wed Apr 21, 2010 11:13 pm

SillyBilly wrote:
Pendo Pilot wrote:But to quote BR rule no 1985, you are not a proper railwayman until you derail/crash something.
:oops:
I crashed on my first day.
that just means your rubbish not that your a proper railwayman :lol:

p.s. what did you crash?

I havent crashed yet :D

SLRmidge

Post by SLRmidge » Wed Apr 21, 2010 11:22 pm

The first time a garden railer friend (who is not a member of this forum) ran his Jane on an indoor layout in Cornwall, it went straight into one of Tag Gorton's super detailed loco's & knocked it completely off the line. Apparently Tag didnt 'say anything!

User avatar
TonyW
Driver
Driver
Posts: 1357
Joined: Fri May 16, 2008 9:25 am
Location: North Wales
Contact:

Post by TonyW » Wed Apr 21, 2010 11:24 pm

I had three derailments while I was at the FR. In all three cases:
- I was driving the loco.
- I was under instruction from somebody in authority (2 x Duty Supervisor, 1 x Controller).
- The movement was in a siding with a known rolling stock restriction.
- I asked "There is such-and-such a restriction here, are you sure this will be OK?" before commencing the movement.
- I was told "It'll be fine".
- It wasn't.
Tony Willmore
Rhos Helyg Locomotive Works: http://www.rhoshelyg.me.uk
Facebook: https://www.facebook.com/RhosHelygLocoWorks

MoelygestLR

Post by MoelygestLR » Thu Apr 22, 2010 12:20 am

TonyW wrote:I had three derailments while I was at the FR. In all three cases:
- I was driving the loco.
- I was under instruction from somebody in authority (2 x Duty Supervisor, 1 x Controller).
- The movement was in a siding with a known rolling stock restriction.
- I asked "There is such-and-such a restriction here, are you sure this will be OK?" before commencing the movement.
- I was told "It'll be fine".
- It wasn't.
That sounds like a very familiar situation to several situations i have heard about and been in both on the FR and WHR!

Pendo Pilot

Post by Pendo Pilot » Thu Apr 22, 2010 1:00 am

I put a class 08 shunt loco down two different sidings at Oxley at the same time in 1990. Thing went 90 degrees to the left.

Then I did this on the Ironbridge branch, although technically it wasn't my fault as the road spread...

Image
Image
Still claimed it as my derailment... :D

kes

Post by kes » Thu Apr 22, 2010 1:25 pm

heard a lovely turn of phrase from friend at Llechfan for such occasions.... 'ahhh, they're having a little lie down' :lol:

The main advantage to model railways - soooo much easier with 'hand of God' to correct such moments of madness ;)

Pendo Pilot

Post by Pendo Pilot » Thu Apr 22, 2010 2:09 pm

kes wrote:heard a lovely turn of phrase from friend at Llechfan for such occasions.... 'ahhh, they're having a little lie down'  :lol:
Will remember that one for next time.. :D :D

Agreed, it's so much easier to sort it out with 16mm or G gauge.. ;)

laalratty

Post by laalratty » Thu Apr 22, 2010 8:30 pm

I've nearly caused a derailment at Ravenglass, luckily upon rearing over the wooden chock i'd accidentaly left in place the wheels dropped back on the rails. This was in the depths of the carriage shed and nobody ever found out about it...

LMS-Jools

Post by LMS-Jools » Fri Apr 23, 2010 7:20 am

Well we know now lol :lol:

kes

Post by kes » Tue Jul 13, 2010 10:09 am

This weekend saw the decommissioning of the blast furnace ready for relocation, now have a great set of industrial bowling pins...

Image

Image


Image


Image

Old track bed uncovered under slag pile, industrial archaeology

Image


There are times when I wish Dad had taken up golf instead...... ;)

Matt

Post by Matt » Tue Jul 13, 2010 1:27 pm

So did that blast furnace actually work?

kes

Post by kes » Tue Jul 13, 2010 1:34 pm

furnace contained power supply for smoke machine and had various bulkhead lights with orange bulbs tucked about the place - and have the odd photo tucked away somewhere with some BIG flames eminating from the 'mixture' that Dad had concocted for such occasions.

The S4C footage which hovers about on a couple of internet tele channels shows the steelworks next door in full flight, gives idea of what furnace could do..

http://gardenrailwaytv.ning.com/video/p ... mpton-down

SLRmidge

Post by SLRmidge » Tue Jul 13, 2010 10:12 pm

Whist on this subject Kes, could the brickworks make bricks?

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests