edrig update

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 9:15 pm

laalratty wrote:That is one great looking Edrig, black lined red looks fantastic

thanks lallratty

thanks guys

Chris · Post by **Chris** » Wed Aug 20, 2008 9:24 pm

Looking very industrial.

I like it.

mhlr · Post by **mhlr** » Wed Aug 20, 2008 9:38 pm

WOW excellent mate! Have you stripped the thread on the boiler bands? if so just replace the bolt...

I must say I wouldn't use Humbrol Acylic on my engines though...

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 9:41 pm

mhlr wrote:WOW excellent mate! Have you stripped the thread on the boiler bands? if so just replace the bolt...

I must say I wouldn't use Humbrol Acylic on my engines though...

thred isnt stripped, its jsut hard to get to with the gas tank in the way, and u have to get the two holes the right distance apart or it wont tighten but i need to have the holes on the side to get the screw in, then i can do it up to tigh cos it will not move, tis jsut a big chain of anoying things.

If the paint comes off, then patch it up.
its fine at the moment, and the model shop said it would be ok.

mhlr · Post by **mhlr** » Wed Aug 20, 2008 9:48 pm

andysleigh wrote:If the paint comes off, then patch it up.
its fine at the moment, and the model shop said it would be ok.

If it does, that means its a bad paintjob/wrong paint!!!

Acrylic is meant for art aplications, or painting wood etc if you are treating it. Acrylic isn't meant for metal, and certainly isn't meant for being on a steam engine where it gets all hot and oily. If it works on yours, it's just luck. I have never come across anyone else using acrylic on metal objects, let alone steam engines!

Anyway, that's my advice! Hence why I said I wouldn't use it!

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 9:51 pm

mhlr wrote:
andysleigh wrote:If the paint comes off, then patch it up.
its fine at the moment, and the model shop said it would be ok.
If it does, that means its a bad paintjob/wrong paint!!!

Acrylic is meant for art aplications, or painting wood etc if you are treating it. Acrylic isn't meant for metal, and certainly isn't meant for being on a steam engine where it gets all hot and oily. If it works on yours, it's just luck. I have never come across anyone else using acrylic on metal objects, let alone steam engines!

Anyway, that's my advice! Hence why I said I wouldn't use it!

1) its not on metal, its on another layer of paint

2) the shop said that its got a new thing in it so it can withstand heat from steam engines.

mhlr · Post by **mhlr** » Wed Aug 20, 2008 9:53 pm

Fair enough. Why didn't you just use enamel in the first place?!

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 9:53 pm

mhlr wrote:
andysleigh wrote:If the paint comes off, then patch it up.
its fine at the moment, and the model shop said it would be ok.
If it does, that means its a bad paintjob/wrong paint!!!

Acrylic is meant for art aplications, or painting wood etc if you are treating it. Acrylic isn't meant for metal, and certainly isn't meant for being on a steam engine where it gets all hot and oily. If it works on yours, it's just luck. I have never come across anyone else using acrylic on metal objects, let alone steam engines!

Anyway, that's my advice! Hence why I said I wouldn't use it!

also harry used acrylic, and it seems to be fine, and the e group didnt sya dont use acrylic

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 9:55 pm

mhlr wrote:Fair enough. Why didn't you just use enamel in the first place?!

because thats not what the shop sent me!

i asked for tamiya flat black, which harry used on his edrig, which i ordered and payed for, and then the shop said we dont have any tamiya flat black, we shall send some humbrol matt black instead, which is the same.

mhlr · Post by **mhlr** » Wed Aug 20, 2008 10:01 pm

ok then, get edrig wet and while its wet, rub it with something. see what happens...

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 10:03 pm

mhlr wrote:ok then, get edrig wet and while its wet, rub it with something. see what happens...

i have, its had oil and water over it, and then de greaser, and nothing happened, jsut gets the grease off

made-in-england · Post by **made-in-england** » Wed Aug 20, 2008 10:03 pm

A genie will pop out and give u three wishes for 3 locos

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 10:04 pm

mhlr wrote:ok then, get edrig wet and while its wet, rub it with something. see what happens...

are you sure your not thinking of emulsion paint, which is water based.

mhlr · Post by **mhlr** » Wed Aug 20, 2008 10:04 pm

andysleigh wrote:
mhlr wrote:ok then, get edrig wet and while its wet, rub it with something. see what happens...
i have, its had oil and water over it, and then de greaser, and nothing happened, jsut gets the grease off

very odd, acrylic is water-based...

mhlr · Post by **mhlr** » Wed Aug 20, 2008 10:06 pm

andysleigh wrote:
mhlr wrote:ok then, get edrig wet and while its wet, rub it with something. see what happens...
are you sure your not thinking of emulsion paint, which is water based.

acrylic is too

If you don't believe me, check: http://www.airfix.com/humbrol-paints-an ... ic-tinlet/

andysleigh · Post by **andysleigh** » Wed Aug 20, 2008 10:08 pm

mhlr wrote:
andysleigh wrote:
mhlr wrote:ok then, get edrig wet and while its wet, rub it with something. see what happens...
are you sure your not thinking of emulsion paint, which is water based.
acrylic is too If you don't believe me, check: http://www.airfix.com/humbrol-paints-an ... ic-tinlet/

quote website -
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealedhardboard and more (always check on a small test area to check suitability).

laalratty · Post by **laalratty** » Wed Aug 20, 2008 10:10 pm

I have used Tamiya acrilic paint for lining my millie, and I can say having applied it in november it is the Trimline for the outer line that is giving out first!

mhlr · Post by **mhlr** » Wed Aug 20, 2008 10:10 pm

FFS, I've had my say, I'll let others have theirs...

made-in-england · Post by **made-in-england** » Wed Aug 20, 2008 10:13 pm

yeah i wouldnt arguee with the airfix site the company that went bust becoasue it gave away to many freebies and is now been rekindled and again dying on its bottom

SillyBilly · Post by **SillyBilly** » Wed Aug 20, 2008 10:33 pm

I thought Hornby bought them?

Garden Railway Forum

edrig update

Who is online