Home lining with transfers.

Discussion of Live Steam locomotives should be located here
Post Reply
User avatar
Dr. Bond of the DVLR
Retired Director
Retired Director
Posts: 4533
Joined: Tue Jun 09, 2009 9:43 pm
Location: Suffolk
Contact:

Home lining with transfers.

Post by Dr. Bond of the DVLR » Wed Apr 07, 2010 4:01 pm

I thought I'd have a go and bring the results to stonleigh in the form of river Alde.
Using a design package I have created fully lined (GER style of course!) panels to fit my loco and tender. To use up the space ont he A4 transfer sheet I also started on River Butley.
I'll get them printed out and fitted and post the results. The most difficult part of it was colour matching, the colour fits well to River Butley but not as well to River Alde (which was lighter) which is fine considering not much will be the original colour as the transfers are whole panels. The Water Slide transfer paper comes from a company called craftey coputer paper.
Image
The railway which people forgot
(to build)

User avatar
Dr. Bond of the DVLR
Retired Director
Retired Director
Posts: 4533
Joined: Tue Jun 09, 2009 9:43 pm
Location: Suffolk
Contact:

Post by Dr. Bond of the DVLR » Wed Apr 07, 2010 10:07 pm

Well, here are the first results, I think they look quite good.
I first tried it out on a tender. One of the tender axle boxes is all of a squaggle I know...
Image
Image
Image
Image
The railway which people forgot
(to build)

laalratty

Post by laalratty » Wed Apr 07, 2010 10:27 pm

Looks pretty good to me, I'm never been sure of the durability of full body transfer though, I've seen a few almost falling off engines

User avatar
Dr. Bond of the DVLR
Retired Director
Retired Director
Posts: 4533
Joined: Tue Jun 09, 2009 9:43 pm
Location: Suffolk
Contact:

Post by Dr. Bond of the DVLR » Wed Apr 07, 2010 10:31 pm

Well one A4 sheet costs about 1.50
soo for the 150 pounds it would cost to have it lined out professionally I could have 100 sheets of this being reapplied. And I am sure before the 100 sheets are up the professional lining would have needed redoing. Also I can fit more than one loco's lining onto a sheet thus dramatically decreasing the cost further. If I varnish them who knows! They may last 2 years or so! My locolines ones lasted 2 years and they were not varnished.
Image
The railway which people forgot
(to build)

taliesin001

Post by taliesin001 » Wed Apr 07, 2010 10:38 pm

You've managed some good results there, it's certainly worth the try.

User avatar
Dr. Bond of the DVLR
Retired Director
Retired Director
Posts: 4533
Joined: Tue Jun 09, 2009 9:43 pm
Location: Suffolk
Contact:

Post by Dr. Bond of the DVLR » Fri Apr 09, 2010 9:45 am

Hmm, the loco didn't quite go as well! The lining sheets crumpled just a tiny amount in places leaving white lines every where - AHhhg!
Image
Damn never mind,
Where can I find you Tony at the show...!
Image
The railway which people forgot
(to build)

User avatar
TonyW
Driver
Driver
Posts: 1357
Joined: Fri May 16, 2008 9:25 am
Location: North Wales
Contact:

Post by TonyW » Fri Apr 09, 2010 10:16 am

Mr. Bond of the DVLR wrote:Where can I find you Tony at the show...!
I'll be there. You won't miss me!
Tony Willmore
Rhos Helyg Locomotive Works: http://www.rhoshelyg.me.uk
Facebook: https://www.facebook.com/RhosHelygLocoWorks

METHSSNIFFER

Post by METHSSNIFFER » Fri Apr 09, 2010 12:36 pm

Cant wait to see you! and everyone else too not long to go now!!

DolwyddelanLightRail

Post by DolwyddelanLightRail » Fri Apr 09, 2010 8:01 pm

I really wish i could go, but school work and the parents get in the way :cry: :cry:

Hancockshire

Post by Hancockshire » Sat Apr 10, 2010 10:07 am

I've got another country in the way let alone the train fares

Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests