Lynton and barnstaple wagons
Lynton and barnstaple wagons
As a side project I thought I'd have a go at a coal wagon. The bogies are wrong but I have used what I had spare. I still need to add the lettering and weight limits on the sides. The wagon itself is made from plywood for the floor and 1.5mm card for the sides and ends. Anyway, photos say a lot more than words....
Last edited by LnBmad on Sun Nov 10, 2013 9:58 pm, edited 1 time in total.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Used the bladed end of a citadel sculpting tool. Sharp enough to create a good dent but blunt enough not to slice straight through.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Following the success of the above wagon and a rummage through my bits... Today I started these:
So that's another bogie wagon (same design) and 2 smaller wagons (correct l&b size but on binnie fr wagon axel boxes and binnie 6 spoke wheels). Am planning to host a steam up in the near future so hope to have these finished by then.... Need to order some couplings this week I think.
So that's another bogie wagon (same design) and 2 smaller wagons (correct l&b size but on binnie fr wagon axel boxes and binnie 6 spoke wheels). Am planning to host a steam up in the near future so hope to have these finished by then.... Need to order some couplings this week I think.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Do you need more Bogies Matt ? I still have a couple of
sets in stock.
sets in stock.
Mike
Wood Valley Works
http://www.woodvalleyworks.co.uk
Wood Valley Light Railway
http://www.wvlr.co.uk
Wood Valley Works
http://www.woodvalleyworks.co.uk
Wood Valley Light Railway
http://www.wvlr.co.uk
Always need more bogies mike! There's bound to be a project to fit them to at some point...
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
A few more sets of coaches perhaps
Mike
Wood Valley Works
http://www.woodvalleyworks.co.uk
Wood Valley Light Railway
http://www.wvlr.co.uk
Wood Valley Works
http://www.woodvalleyworks.co.uk
Wood Valley Light Railway
http://www.wvlr.co.uk
Probably... Beading on carriage 7 on the agenda this week.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Nice one Matt, looking forward to seeing the photos
Mike
Wood Valley Works
http://www.woodvalleyworks.co.uk
Wood Valley Light Railway
http://www.wvlr.co.uk
Wood Valley Works
http://www.woodvalleyworks.co.uk
Wood Valley Light Railway
http://www.wvlr.co.uk
Ill try not to disappoint.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Now ready for paint tomorrow... Then just need to fit the couplings.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Nearly there...
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
- Dr. Bond of the DVLR
- Retired Director
- Posts: 4485
- Joined: Tue Jun 09, 2009 9:43 pm
- Location: Suffolk
- Contact:
It's a cardboard roof.
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Second wagon completed to the same stage tonight. Next up is painting, fitting door handles and couplings. Hope to gave them running this weekend
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Just need to fit handles and we are ready to go
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Who is online
Users browsing this forum: No registered users and 0 guests