ageing wood
- jez kirkwood
- Trainee Fireman
- Posts: 121
- Joined: Sat Nov 19, 2011 9:39 pm
- Location: forest of dean
ageing wood
First thing to do is make some 'soup', I use an old coffee jar into which I have placed a few rusty nails and a wodge of wire wool, this is then filled with white vinegar and left with it's lid on for a few days.....
Next cut all the wood to size, I have a small bandsaw and usually rip old timber to the sizes I need but basswood sections work just as well. For this model I'm using oak for the framing and mahogony for the planks (these are from old scrap bit of furniture), different woods will react differently to the 'soup' so experiment. take one piece at a time and mount in a vice.
Remember that you only need to treat the areas that will be seen. Next take a drill mounted wire brush and attack the wood - in the pic I'm using a small brush in a dremel but I often use a larger 'DIY shop bargain bin' one in a standard cordless drill.
Turn the piece over and do all visible sides, it's easy to vary the amount of decay you put in. You should end up with something like this.
Now it's time to brush on the 'soup'. Use a largish brush and paint on a generous amount - don't expect any instant results, although depending on the type of wood and the strength of your 'soup' you may see some quick changes. In this case the 'soup' has been maturing for a few months and reacted almost straightaway with the oak (which has very high levels of tanin) but the mahogony just looked wet.
Now the fun bit - leave the wet wood on a tray and go have a drink, check the forum and go to bed! Next morning the magic should have happened........
Easy as that, and cheap
Cheers
Jez
Next cut all the wood to size, I have a small bandsaw and usually rip old timber to the sizes I need but basswood sections work just as well. For this model I'm using oak for the framing and mahogony for the planks (these are from old scrap bit of furniture), different woods will react differently to the 'soup' so experiment. take one piece at a time and mount in a vice.
Remember that you only need to treat the areas that will be seen. Next take a drill mounted wire brush and attack the wood - in the pic I'm using a small brush in a dremel but I often use a larger 'DIY shop bargain bin' one in a standard cordless drill.
Turn the piece over and do all visible sides, it's easy to vary the amount of decay you put in. You should end up with something like this.
Now it's time to brush on the 'soup'. Use a largish brush and paint on a generous amount - don't expect any instant results, although depending on the type of wood and the strength of your 'soup' you may see some quick changes. In this case the 'soup' has been maturing for a few months and reacted almost straightaway with the oak (which has very high levels of tanin) but the mahogony just looked wet.
Now the fun bit - leave the wet wood on a tray and go have a drink, check the forum and go to bed! Next morning the magic should have happened........
Easy as that, and cheap
Cheers
Jez
-
- Trainee Fireman
- Posts: 117
- Joined: Tue Oct 25, 2011 10:01 pm
- Location: Top Left Hand corner of Wales
- Contact:
genius, thanks
Romans and railways
my 32mm Railway site
www.dinerthrailwayworks.webs.com/
7 1/4 railway
www.lnwrrailway.webs.com/
my youtube account
http://www.youtube.com/user/elika80?feature=mhee
PENRHYN RAILWAY
http://www.penrhynrailway.co.uk/
my 32mm Railway site
www.dinerthrailwayworks.webs.com/
7 1/4 railway
www.lnwrrailway.webs.com/
my youtube account
http://www.youtube.com/user/elika80?feature=mhee
PENRHYN RAILWAY
http://www.penrhynrailway.co.uk/
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
-
- Cleaner
- Posts: 87
- Joined: Sun Jan 01, 2017 11:36 am
- Location: Cornwall
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
Another method which works..............
Buy (pauses for cries of "Shock!" and "Horror!") a bottle of Indian Ink from a craft shop. Take one of those little jars that jam and marmalade comes in when you go for an afternoon tea, almost fill it with water and add a brushful or so of the ink. Brush this on the wood. You may find it easier to experiment to get the right dilution, and you can, of course, use more than one coat to get your desired effect. If your trial comes out too dark, add more water. I also often distress the top plank of a wagon to get a "worn" look, and these days it's usually applied before assembly, as PVA or any other glue stops the mix from getting into the wood. I sometimes used to leave a plank out of the staining process, so it looked like the wagon had been repaired. Two examples here...........
.......... When I go outside tomorrow, I'll get my rake of Jurassic rubbish wagons out and get a picture.
Buy (pauses for cries of "Shock!" and "Horror!") a bottle of Indian Ink from a craft shop. Take one of those little jars that jam and marmalade comes in when you go for an afternoon tea, almost fill it with water and add a brushful or so of the ink. Brush this on the wood. You may find it easier to experiment to get the right dilution, and you can, of course, use more than one coat to get your desired effect. If your trial comes out too dark, add more water. I also often distress the top plank of a wagon to get a "worn" look, and these days it's usually applied before assembly, as PVA or any other glue stops the mix from getting into the wood. I sometimes used to leave a plank out of the staining process, so it looked like the wagon had been repaired. Two examples here...........
.......... When I go outside tomorrow, I'll get my rake of Jurassic rubbish wagons out and get a picture.
Last edited by MDLR on Thu Aug 31, 2017 7:08 pm, edited 2 times in total.
I like that technique, superb aged look
Jon
Have fun steaming
Now put the kettle on....sit back and browse my webpage http://fwpl.webs.com/
Have fun steaming
Now put the kettle on....sit back and browse my webpage http://fwpl.webs.com/
Re: ageing wood
Thats so cool and very very cheap Jez... Thanks..
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Who is online
Users browsing this forum: No registered users and 0 guests