If you would like to share some of your garden railway photographs or photos of prototypes which might inspire members, then please post them in here
-
SillyBilly
- Retired Director
- Posts: 3536
- Joined: Sat Aug 18, 2007 11:00 pm
Post
by SillyBilly » Sun Nov 04, 2007 7:42 pm
But £1,500 is a lot of money, I'm sure for many people it was the cheapest way to get an NGG16, I want to see an NG15 in 16mm now
!
-
steamyjim
- Retired Director
- Posts: 1210
- Joined: Tue Oct 16, 2007 9:19 pm
Post
by steamyjim » Sun Nov 04, 2007 9:19 pm
I want to see this Garratt that i have made up
Its called a Beyer Mallet. Bassicly its 2 chassis with a tank on top then a immense boiler then another 2 chassis with a tank on top
Wouldnt that be great!!!
-
SillyBilly
- Retired Director
- Posts: 3536
- Joined: Sat Aug 18, 2007 11:00 pm
Post
by SillyBilly » Sun Nov 04, 2007 9:44 pm
That makes no sense Jimmy, becuase Beyer only manufacture it, so a Beyer Mallet, is just a Mallet built by Beyer Peacock!
-
steamyjim
- Retired Director
- Posts: 1210
- Joined: Tue Oct 16, 2007 9:19 pm
Post
by steamyjim » Sun Nov 04, 2007 9:47 pm
I know that. It juts sounds good
I thoguht that when i came up with the name
-
garratt100
- Trainee Fireman
- Posts: 142
- Joined: Fri Oct 19, 2007 6:08 pm
-
Contact:
Post
by garratt100 » Sun Nov 04, 2007 10:38 pm
SillyBilly wrote:But £1,500 is a lot of money, I'm sure for many people it was the cheapest way to get an NGG16, I want to see an NG15 in 16mm now
!
You want an NGG15?
Well, just watch the Accucraft website for announcements...
Also, if you're wanting a coal fired one, keep your ear to the ground too...
Chris.
-
Chris Cairns
- Driver
- Posts: 2366
- Joined: Mon Oct 29, 2007 7:25 pm
- Location: Glasgow, Scotland
Post
by Chris Cairns » Mon Nov 05, 2007 9:09 am
To qualify as a Mallet loco one of your drive units would need to be fixed, whilst the other can articulate. In a Garratt both units articulate. And if I've got it right a Saxon Meyer has a fixed and an articulated unit, but the cylinders are both in the middle of the loco.
Chris Cairns.
-
SillyBilly
- Retired Director
- Posts: 3536
- Joined: Sat Aug 18, 2007 11:00 pm
Post
by SillyBilly » Mon Nov 05, 2007 5:23 pm
garratt100 wrote:SillyBilly wrote:But £1,500 is a lot of money, I'm sure for many people it was the cheapest way to get an NGG16, I want to see an NG15 in 16mm now
!
You want an NGG15?
Well, just watch the Accucraft website for announcements...
Also, if you're wanting a coal fired one, keep your ear to the ground too...
Chris.
I don't want one, just want to see one!
But your right, it probably is likely that Accucraft will produce one.
-
steamyjim
- Retired Director
- Posts: 1210
- Joined: Tue Oct 16, 2007 9:19 pm
Post
by steamyjim » Mon Nov 05, 2007 6:10 pm
Whats the differance between a NGG16 and a NGG15?
-
steamyjim
- Retired Director
- Posts: 1210
- Joined: Tue Oct 16, 2007 9:19 pm
Post
by steamyjim » Mon Nov 05, 2007 6:10 pm
By logic the NGG15s smaller but i dont know
-
garratt100
- Trainee Fireman
- Posts: 142
- Joined: Fri Oct 19, 2007 6:08 pm
-
Contact:
Post
by garratt100 » Mon Nov 05, 2007 6:41 pm
steamyjim wrote:Whats the differance between a NGG16 and a NGG15?
A '16' is a 2-6-2 2-6-2 Garratt, a '15' is a straight 2-8-2 loco with a bogie tender.
If you include the tender, they are both almost the same length!
The Welsh Highland Railway has examples of both types.
Chris.
-
steamyjim
- Retired Director
- Posts: 1210
- Joined: Tue Oct 16, 2007 9:19 pm
Post
by steamyjim » Mon Nov 05, 2007 7:30 pm
Were they numbered in order of when they were introduced?
-
steamyjim
- Retired Director
- Posts: 1210
- Joined: Tue Oct 16, 2007 9:19 pm
Post
by steamyjim » Tue Nov 06, 2007 7:26 am
Now that would have some power!!!!!
-
TonyW
- Driver
- Posts: 1357
- Joined: Fri May 16, 2008 9:25 am
- Location: North Wales
-
Contact:
Post
by TonyW » Fri May 16, 2008 9:28 am
steamyjim wrote:Whats the differance between a NGG16 and a NGG15?
There is no such thing as an NGG15. The correct term is NG15.
NG stands for Narrow Gauge, NGG stands for Narrow Gauge Garratt.
Who is online
Users browsing this forum: No registered users and 0 guests