Page 1 of 1

New Rake for the W&LLR

Posted: Tue Jan 11, 2011 10:42 pm
by Narrow Minded
First of all thanks go out to Mr Bond for supplying one of the coaches and MDLR for the duckets :D

I'm currently building a rake of three IP Freelance 2 comp coaches to form the regular service passenger stock for the Westwood & Loscoe.

I've re-gauged, repainted and reglazed the coach from Zach and replaced the flimsy plasticard roof with one cut from ply. (The ply roofs will be fitted to all three coaches) All that remains to be done is the application of W&LLR crests (in stores), class designation and coach numbers (on order)

The second coach aquired on eBay is under construction as I type, with the basic "box" section complete, next job will be to fettle the overlays at one end to fit the guards duckets.

The third coach is awaiting delivery from IP Engineering, along with the 45mm gauge wheelsets for the second coach.
Anyone aware of current delivery times from IP? I ordered at the weekend and I'm busy with the current build / mod, so I'm not panicking yet :D

Photo's to follow, along with pic's of other recent activity TOMORROW (Yay!)

Posted: Wed Jan 12, 2011 1:25 pm
by Dr. Bond of the DVLR
and the forth, the restaurant car... Do you still want one?

Posted: Wed Jan 12, 2011 1:37 pm
by Narrow Minded
Mr. Bond of the DVLR:46554 wrote:and the forth, the restaurant car... Do you still want one?
I had TOTALLY forgotten! :oops:
The short answer is a resounding "Yes Please" - PM to follow :roll:

Posted: Wed Jan 12, 2011 3:50 pm
by 90733
Narrow Minded:46555 wrote:
Mr. Bond of the DVLR:46554 wrote:and the forth, the restaurant car... Do you still want one?
I had TOTALLY forgotten! :oops:
The short answer is a resounding "Yes Please" - PM to follow :roll:
Now that sounds interesting, any more info? :D

Posted: Wed Jan 12, 2011 7:36 pm
by Sir Clothem Cap
a restaurant car now that's different.

Posted: Tue Jan 25, 2011 6:28 pm
by Narrow Minded
Oops! Fundemental error :oops:

just cut two roofs from my last sheet of appropriate thickness ply and being sooooooooooo clever, I cut them to waste the least amount of timber.
Of course I've cut across the main grain rather than along it so they won't curve nice and easily into the roof profile (in fact they'll hardly bend at all!!!).

Time to put the kettle on :?
(and when you've all finished laughing, don't forget to file this under "things to remember not to do!" :D )

Posted: Tue Jan 25, 2011 6:31 pm
by taliesin001
We all do things like that! A couple of times I've made a roof, forgotten about it and then found that same piece of ply and used it for something else. I then of course spend time looking for the roof and then remember I just cut it up!