Page 1 of 1
Sold
Posted: Thu Feb 04, 2021 5:40 pm
by -steves-
Just really testing the water and see if any interest.
I am selling a 3D printed kit form of the German LKM NS2f as seen in my threads. 32mm gauge only.
It includes all parts required to build it including wired LED's, motor, gears, machined pre quartered stainless steel axles, axle bushes, conrod bushes and bolts, motor bolts etc and even comes with a high detail resin driver. Also has build notes and parts list.
Price is £95 posted
If anyone requires any further pictures of the parts etc, please just let me know on here.
- IMG_20210204_163120.jpg (1.59 MiB) Viewed 7417 times
- IMG_20210204_163201.jpg (1.88 MiB) Viewed 7417 times
Re: Loco kit
Posted: Thu Feb 04, 2021 6:14 pm
by ge_rik
When compared with other offerings from suppliers, this seems quite reasonably priced to me.
Rik
Re: Loco kit
Posted: Thu Feb 04, 2021 6:28 pm
by -steves-
ge_rik wrote: ↑Thu Feb 04, 2021 6:14 pm
When compared with other offerings from suppliers, this seems quite reasonably priced to me.
Rik
I have tried to price it as best I can, as you can see by the list of parts, it's quite complex
Re: Loco kit
Posted: Thu Feb 04, 2021 6:51 pm
by -steves-
Please note that I only have two of these and they will be going up for sale elsewhere in the next day or two if they don't sell on here.
Re: Loco kit
Posted: Sat Feb 06, 2021 4:26 pm
by Phil.P
Hi Steve,
Are the panels all printed?
If so, resin or deposition?
What motor have you used / supply? - voltage?
Thanks,
Phil. P
Re: Loco kit
Posted: Sat Feb 06, 2021 4:32 pm
by philipy
Phil,
I'm sure Steve will be along to answer for himself but until he does, this is his build thread for it.
https://gardenrails.org/forum/viewtopic ... 54&t=12979
Re: Loco kit
Posted: Sat Feb 06, 2021 4:44 pm
by -steves-
Phil.P wrote: ↑Sat Feb 06, 2021 4:26 pm
Hi Steve,
Are the panels all printed?
If so, resin or deposition?
What motor have you used / supply? - voltage?
Thanks,
Phil. P
Hi Phil
The item is all FDM printed apart from the seated driver which is resin printed. The motor is a an MFA 280 12v - 24v
I was actually in the other room taking more pictures of the kit to put it up on other sites as well
I will add them below in a few short while.
Cheers
Steve
Re: Loco kit
Posted: Sat Feb 06, 2021 5:00 pm
by -steves-
Here is a better picture of what comes in the kit.
Re: Loco kit
Posted: Sun Feb 07, 2021 10:22 am
by Phil.P
Thanks for the link to the build - thread, and the additional photo..
Phil. P
Re: Loco kit
Posted: Sun Feb 07, 2021 10:35 am
by Phil.P
Right...
I have read through the build - thread.
To avoid embarrassment (mine) I will take this to a conversation with Steve..
Re: Loco kit
Posted: Sun Feb 07, 2021 1:31 pm
by Phil.P
After a conversation with Steve... i have bought a kit.
Now,
Don't get too excited! - I have bought many, many kits.. Mostly, I open them, check the contents, then pack them away again.
I just need more tu-its.. Round, rather than the inferior hexagonal ones!
Phil.P
Re: Loco kit
Posted: Sun Feb 07, 2021 1:35 pm
by -steves-
One sold only one left
Re: Loco kit
Posted: Sun Feb 07, 2021 2:02 pm
by philipy
Phil.P wrote: ↑Sun Feb 07, 2021 1:31 pm
After a conversation with Steve... i have bought a kit.
Now,
Don't get too excited! - I have bought many, many kits.. Mostly, I open them, check the contents, then pack them away again.
I just need more tu-its.. Round, rather than the inferior hexagonal ones!
Phil.P
I believe that there is a quite a good magasine that is always looking for good " how I built this.." type articles?
Re: Loco kit
Posted: Sun Feb 07, 2021 2:36 pm
by Phil.P
You don't mean that 'terrible' one? - According to certain members of an area group?
If so, I have probably worked out who you are too?
Phil. P
Re: Loco kit
Posted: Sun Feb 07, 2021 2:51 pm
by philipy
Phil.P wrote: ↑Sun Feb 07, 2021 2:36 pm
You don't mean that 'terrible' one? - According to certain members of an area group?
If so, I have probably worked out who you are too?
Dunno? I'm not actually in any Area Groups so no idea what they are saying?
Re: Loco kit
Posted: Mon Feb 08, 2021 9:42 pm
by -steves-
One kit left, any takers? It's £10 cheaper on here than FB, forum member discounts and all that.
Re: Loco kit
Posted: Wed Feb 10, 2021 6:06 pm
by -steves-
All sold now, thank you.