Roberts Wood Light Railway
- tom_tom_go
- Driver

- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Whistles work well with cat removalsRoberts wood light railwa:109888 wrote:gets in the way alot and thinks its good to sit on the line when a fast approaching mamod rounds the curveMDLR:109854 wrote:That's coming along very nicely! What does the kitten make of it?
https://youtu.be/M19k3ZFmoMY
-
Roberts wood light railwa
one problem .... manual whistle loltom_tom_go:110134 wrote:Whistles work well with cat removalsRoberts wood light railwa:109888 wrote:gets in the way alot and thinks its good to sit on the line when a fast approaching mamod rounds the curveMDLR:109854 wrote:That's coming along very nicely! What does the kitten make of it?
https://youtu.be/M19k3ZFmoMY
- Chris Cairns
- Driver

- Posts: 2372
- Joined: Mon Oct 29, 2007 7:25 pm
- Location: Glasgow, Scotland
Good tip for weighing down the Binnie Skips here (I use small fishing line weights off eBay) - http://reviews.laurell.nu/kits/binnie-01.html
I run mine on the supplied wheels but have added a sand load (sand & 50% water/PVA mix which takes about a week to set!) which is sealed on the outside with kitchen film thus still removeable.
I was a bit in blicker mode rushing around picking up all my shopping so had not seen the Groudle Glen Railway clearout at IP Engineering. Someone on the layout mentioned it so I rushed back to pick up a Sea Lion, Coach A or B & Coach C or D kit. I'll stick a request up for the correct paint colours to be used in the Help Me section now.
Chris Cairns
I run mine on the supplied wheels but have added a sand load (sand & 50% water/PVA mix which takes about a week to set!) which is sealed on the outside with kitchen film thus still removeable.
I was a bit in blicker mode rushing around picking up all my shopping so had not seen the Groudle Glen Railway clearout at IP Engineering. Someone on the layout mentioned it so I rushed back to pick up a Sea Lion, Coach A or B & Coach C or D kit. I'll stick a request up for the correct paint colours to be used in the Help Me section now.
Chris Cairns
-
Roberts wood light railwa
im not sure what loads i shall be having in my skips at the moment maybe sand but more than likely 'rubble'
i wasn't going to go without one when i saw them, hoping to have the loco finished soon then i can move onto the binnies then the coach so watch this space.
as for painting mine wont be the traditional colours as the picture provided shows. i haven't decided on a colour yet.
cheers james
i wasn't going to go without one when i saw them, hoping to have the loco finished soon then i can move onto the binnies then the coach so watch this space.
as for painting mine wont be the traditional colours as the picture provided shows. i haven't decided on a colour yet.
cheers james
-
Roberts wood light railwa
News from the line: groudle Glen 'polar bear' underwent more testing last night at high speed. This loco has a ridiculous amount of grip even though it's only 2 wd. I have commissioned a friend of mine to build me a line side hut which should be ready by now the next few week's. All joins now have fish plates ( I ran out whilst building the line) so running is a lot smoother. The faller railcar has had its seats and roof painted and the binnie skips are coming on nicely.
News from the steam shed. Mamod "robert" suffered yet another gauge glass failure on Monday evening. This is a problem that will be sorted go for good shortly which means a little earlier than planned, the new mamod saddle tank is having to run all steam services on the line whilst running in. Performance has been made a lot better with the fitting of a adjustable Roy wood safety valve and a meths burner
Locos from rwlr will be on their travels this weekend as they visit a local line. Locos expected to travel are the new mamod, faller railcar and simplex caravan along with numerous items of stock so look out for those pictures early next week
News from the steam shed. Mamod "robert" suffered yet another gauge glass failure on Monday evening. This is a problem that will be sorted go for good shortly which means a little earlier than planned, the new mamod saddle tank is having to run all steam services on the line whilst running in. Performance has been made a lot better with the fitting of a adjustable Roy wood safety valve and a meths burner
Locos from rwlr will be on their travels this weekend as they visit a local line. Locos expected to travel are the new mamod, faller railcar and simplex caravan along with numerous items of stock so look out for those pictures early next week
-
Roberts wood light railwa
- Andrew
- Moderator

- Posts: 3422
- Joined: Tue Jul 03, 2012 1:33 pm
- Location: Bristol, UK
- Contact:
- Dr. Bond of the DVLR
- Retired Director

- Posts: 4533
- Joined: Tue Jun 09, 2009 9:43 pm
- Location: Suffolk
- Contact:
-
Roberts wood light railwa
hi andrew i got it in a job lot of items but i think its one off from a man who is now making alot of items for 16mm and i think this may have been one of his first im yet to ask him. i shall get onto him this week ans confirm it.Andrew:110412 wrote:That's looking great!
You may have said already somewhere, but what are the origins of the maroon guard's van? It looks great with your saddle tank.
Cheers,
Andrew
cheers james
-
Roberts wood light railwa
-
Roberts wood light railwa
-
Joe
-
Roberts wood light railwa
-
Roberts wood light railwa
recent pictures of the railway... as you can see the railcar is no longer blue and is sporting its nice green with whiskers scheme. At present the line is out of action due to me putting a new siding in to allow me to run abit better with no reversing. having a running session on saturday afternoon so i shall have to get a move on, pics to follow after saturdays running but for now i hope you enjoy these












-
Roberts wood light railwa
-
Roberts wood light railwa
mamod out of the works
after last weeks lineside fire which burnt one side of the mamod it was in need of a repaint so whilst i was at it i decided to do the cosmetic work i have wanted to do on it for a while. I started by repainting the loco and the cylinder covers then moving on to fit the coal baskets. next i ordered new buffer beams and multi height coupliungs from dreamsteam which went on with no trouble. using the existing full length wooden buffer i chopped them into 4 to much some smaller buffers. i then finally added a oil pourer from roundhouse. for the time being the loco is finished but there maybe a few more bits added in the future.










Who is online
Users browsing this forum: No registered users and 25 guests





















