F & B Ashbury Coaches

[philipy]

That is a great result for all your effort Philip. How about magnetic fittings for the roof, so that you can display the work you've done internally?

Thanks Phil. I never thought about magnetic fixing the roof, I'll think about that.

[LNR]

I keep going back and looking at the chap with the top hat framed in the window in the second shot, that looks so real.
Grant.
PS a pic of the engine and carriages would be good.

[philipy]

Thanks Grant.

PS a pic of the engine and carriages would be good.

Yes, I haven't even seen them all together myself yet!
After the very wet and not very cold winter we've been having ( although it's bitterly cold and might snow today!) my garden track looks like a cross between the BigDipper at Blackpool Pleasure Beach and the jungles of Borneo, and is not very conducive to photography! I promise I'll take some pics and hopefully one of my awful little video's as soon as it's worth it.
In the meantime, I did manage to put a sneaky print of the body of one of the All Thirds on over night and it is currently dripping:

IMG_0180.jpg (453.93 KiB) Viewed 726 times

[ge_rik]

Does the build plate tilt on your printer? I wish mine did, it would help catch the drips after printing.

Rik

[philipy]

Does the build plate tilt on your printer? I wish mine did, it would help catch the drips after printing.

Rik

No, not as such. The silvery coloured bit is a printed part which is clamped around the plate mount bracket and gives the angle.
So the pic below shows how it sits it is whilst printing. Once the print is finished, I simply loosen the big knurled knob, slide it forward and relocate it on to the slot in the angled bit. You can't really see but it is also slightly angled forward so that the resin runs to the bottom RH corner and improves the amount that drips. The stl for it came from Thingiverse. Just do a search for your machine and look for "drip bracket" or similar. you'll probably find there are half a dozen variants by different people and its just a case of looking until you find one you like. I think i printed a couple of others before I found this one.

IMG_0181.jpg (293.75 KiB) Viewed 718 times

IMG_0182.jpg (355.25 KiB) Viewed 712 times

[ge_rik]

Thanks. That looks handy.

Rik