ebay Mamod identification and advice.

A very popular starting point for Live Steam. With their low cost comes a number of problems which can be discussed here
Post Reply
Jerm
Trainee Fireman
Trainee Fireman
Posts: 114
Joined: Thu Jun 16, 2011 7:06 pm
Location: Peterborough, Ontario, Canada

ebay Mamod identification and advice.

Post by Jerm » Wed Jun 29, 2011 2:29 am

Evening all. Not sure if this belongs here or over in the Help Me section (forum regents feel free to move if thats the case).

Found this on eBay today. Not that I can REALLY afford it right now, but it is on the correct side of the Atlantic and border for me. I can't tell what edition of Mamod this is so I guess I'm looking for your general thoughts. Worth it? Good edition? Yay? Nay?

I note it seems to have the solid fuel and last I checked the consensus was to upgrade to a gas. At least I know I would prefer butane if I had the choice. But, again, the price isn't that bad.

Thanks!

http://cgi.ebay.ca/Mamod-MSS-Locomotive ... 1920wt_905

User avatar
Sir Clothem Cap
Driver
Driver
Posts: 1708
Joined: Sun Sep 26, 2010 8:45 pm
Location: Hampshire
Contact:

Post by Sir Clothem Cap » Wed Jun 29, 2011 8:48 pm

It is the standard Mss version kit of the original Sl1 A good general engine but mss do have a poor reputation for the wheels coming loose on the axles. I have 3 of the sl1 locos and love them.

They are very easy to up rate by uprating the safety valve and changing the burner to meths or gas. Buy some steel wheels for it too.

Jerm
Trainee Fireman
Trainee Fireman
Posts: 114
Joined: Thu Jun 16, 2011 7:06 pm
Location: Peterborough, Ontario, Canada

Post by Jerm » Wed Jun 29, 2011 9:47 pm

Thanks for the comments, I kind of expected that some work would be needed. Worth noting that I found this same kit retailing here (in Canada) for $540.

User avatar
Sir Clothem Cap
Driver
Driver
Posts: 1708
Joined: Sun Sep 26, 2010 8:45 pm
Location: Hampshire
Contact:

Post by Sir Clothem Cap » Thu Jun 30, 2011 10:47 am

Just had another look at the photo and noticed that there are no nuts bolts or rivets pictured and only one buffer beam. as there is no written description I'm wondering if this a complete kit or just most of a kit. that may explain the price.

Jerm
Trainee Fireman
Trainee Fireman
Posts: 114
Joined: Thu Jun 16, 2011 7:06 pm
Location: Peterborough, Ontario, Canada

Post by Jerm » Thu Jun 30, 2011 3:23 pm

Hmm, good point. I assumed the picture is stock but those are concerns definitely worth asking the seller about. Cheers!

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests