Sm32.co.uk Fly Cranks required
Sm32.co.uk Fly Cranks required
Hi all
Haven’t been on here in ages, looking get back into the swing of 16mm and have a few projects in mind.
A while (quite a while now) there was a company with the above website that sold Merlin and roundhouse upgrades. They don’t seem to be around anymore but they used to sell fly cranks for roundhouse locos.
Does anyone know where I could get some or if someone can make them (happy to pay obvs)?
Can’t find any pictures which is annoying
Haven’t been on here in ages, looking get back into the swing of 16mm and have a few projects in mind.
A while (quite a while now) there was a company with the above website that sold Merlin and roundhouse upgrades. They don’t seem to be around anymore but they used to sell fly cranks for roundhouse locos.
Does anyone know where I could get some or if someone can make them (happy to pay obvs)?
Can’t find any pictures which is annoying
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Sm32.co.uk Fly Cranks required
Roundhouse fit FC to some of their locos, if you contact them I am sure they will sell them separately.
Re: Sm32.co.uk Fly Cranks required
Mmmm... yes, they used to make some really, really nice replacement fly cranks for Linda, Blanche and Charles that looked just like the genuine Hunslet product. Lovely square edges, and counterbored at the back so that fitted over the axle bearing and so leaving no gap between the frames and the back of the crank.
Chuffed2Bits made an identical product but I guess the market evaporated when Roundhouse stopped making the locos. Last time I asked him MikeD at C2B had no plans to make any more.
Last edited by TonyW on Tue May 28, 2019 8:49 pm, edited 1 time in total.
Tony Willmore
Rhos Helyg Locomotive Works: http://www.rhoshelyg.me.uk
Facebook: https://www.facebook.com/RhosHelygLocoWorks
Rhos Helyg Locomotive Works: http://www.rhoshelyg.me.uk
Facebook: https://www.facebook.com/RhosHelygLocoWorks
Re: Sm32.co.uk Fly Cranks required
They also used to make some that were like the rear ones of the Roundhouse Russell but for all the wheels, really wish I had some photos.
Re: Sm32.co.uk Fly Cranks required
like the rear ones on this one:
https://anythingnarrowgauge.co.uk/image ... 00x400.jpg
https://anythingnarrowgauge.co.uk/image ... 00x400.jpg
Re: Sm32.co.uk Fly Cranks required
Thanks but I think they only do the rear wheel set, ill have a look on the website thoughtom_tom_go wrote: ↑Tue May 28, 2019 4:20 pm Roundhouse fit FC to some of their locos, if you contact them I am sure they will sell them separately.
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Sm32.co.uk Fly Cranks required
i'm sure they would but they have a crank pin rather then being able to take the bolt/screw
Re: Sm32.co.uk Fly Cranks required
There are three current, different and distinct types of Roundhouse fly crank:
- The normal "teardrop" shape used on most models.
- The "wedge" shaped ones used on the Darjeeling B-Class.
- The really big ones used on SR&RL No. 24.
They all have the same geometry, fit the same axles and take the same size crank pins, and so can be interchanged at will.
Early Russells had six teardrops but later ones have Darjeeling-style on the back axle only, in keeping with the full-size loco.
- The normal "teardrop" shape used on most models.
- The "wedge" shaped ones used on the Darjeeling B-Class.
- The really big ones used on SR&RL No. 24.
They all have the same geometry, fit the same axles and take the same size crank pins, and so can be interchanged at will.
Early Russells had six teardrops but later ones have Darjeeling-style on the back axle only, in keeping with the full-size loco.
Re: Sm32.co.uk Fly Cranks required
Thanks that is really helpful, I will see if I can order those then
Who is online
Users browsing this forum: No registered users and 0 guests