A place for discussing diverse methods of powering locomotives, such as Internal Combustion, Wind, etc...
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Sun Mar 05, 2017 9:04 pm
A while back I bought a couple of Hornby clockwork chassis, no body included and have finally started to build a body for one. The wheelbase isn't right but I've always likes Kerr Stuart Wrens so decided to make one.
The body as of yesterday...
Today I was brave and ran the motor to see if the expanding spring would explode the body, this is the loco post-testing so all appears to be well
![Image](http://i358.photobucket.com/albums/oo30/a3000inperil/P1180288.jpg)
-
Crackingjob
- Trainee Driver
![Trainee Driver Trainee Driver](./images/ranks/GREASE-TOP-HAT.jpg)
- Posts: 510
- Joined: Sat May 09, 2009 9:58 pm
- Location: West Cornwall
Post
by Crackingjob » Sun Mar 05, 2017 9:12 pm
Welcome to the clockwork club. Having built several, the only thing you will need to do to run on sm32 track is to turn down the flanges a touch...be prepared for quick travel, unless you can build a momentum car to slow it
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Sun Mar 05, 2017 9:31 pm
Our line is a combination of Mamod track and tinplate so it rockets quite well along the route
![:)](./images/smilies/icon_smile.gif)
Our two boys spent happy hours this summer chasing around the garden as the chassis shot along telling it to slow down
![:)](./images/smilies/icon_smile.gif)
-
JCSteam
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 115
- Joined: Thu Aug 18, 2016 6:52 pm
- Location: Darlington
Post
by JCSteam » Wed Mar 22, 2017 10:39 pm
Have you managed to do any more on this? I'm interested to see the outcome
My kids love my Hornby clockwork,as they can easily play with it too
Would be good to build them a loco without worrying that bits may get damaged
![:roll:](./images/smilies/icon_rolleyes.gif)
Jon
Have fun steaming
Now put the kettle on....sit back and browse my webpage
http://fwpl.webs.com/
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Thu Mar 23, 2017 7:40 pm
This is the progress so far, I suspect the cab would be a little fragile for smaller children (my 2yo and 5yo won't be getting their hands on this one) but the rest comes out fairly strong.
Next job is to cut out the bits to make the saddle tank....
-
spooner
- Fireman
![Fireman Fireman](./images/ranks/shovel.jpg)
- Posts: 358
- Joined: Sat May 01, 2010 12:21 pm
- Location: Woodston,Peterborough
Post
by spooner » Thu Mar 23, 2017 8:20 pm
The Wren's on the Falkland Irelands had enclosed cabs. They would be stronger.
Ian
WLR
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Fri Mar 24, 2017 7:30 pm
I'd been considering going for an enclosed cab on this one, based on the garden sheds the military added to these two...
But decided that they would make it almost impossible to get at the levers that control the clockwork motor. I'll probably make an electric one as well at some point complete with garden shed and military paint job
![:)](./images/smilies/icon_smile.gif)
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Sat Mar 25, 2017 7:19 pm
It was "Porton Down 75 years of chemical and biological research" by GB Carter, however Industrial Rail Record no. 148 has this picture and some others too as well as full details of the locos and their history before they were used on the Porton Light Railway.
-
spooner
- Fireman
![Fireman Fireman](./images/ranks/shovel.jpg)
- Posts: 358
- Joined: Sat May 01, 2010 12:21 pm
- Location: Woodston,Peterborough
Post
by spooner » Sun Mar 26, 2017 10:59 am
The Porton Wren's cabs look one sided?
Do you no what "D.E.S." stand for?
The clockwork Wren is shaping up nicely.
Ian
WLR
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Sun Mar 26, 2017 9:37 pm
The DES is Department of Explosive Supplies.
The cabs were half across the front, down one side and across the back, from what I can tell they were just added onto the steel frame that holds the standard wren roof up.
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Tue Mar 28, 2017 7:29 pm
So, a while back I bought a 4 axis desktop CNC router with some inheritance money and I've been using it to cut out some of the pieces for the wren. Today I bravely tried using the 4th axis to turn the funnel and, in spite of a couple of hours of teething problems, I think it worked out okay
There are more bits waiting for the saddle tank to make a frame which I'll wrap thin plasticard round to skin it which will probably be the next posting
![:)](./images/smilies/icon_smile.gif)
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Sun Apr 02, 2017 12:24 pm
So, to make the saddle tank I cut pieces to make a frame of the correct shape and size...
Once I was sure that it would sit properly I skinned it in thin plasticard. The next job will be to fill any small gaps with milliput and then carefully add rivets in the appropriate places around the tank before gluing it in place.
Here it is with the saddle tank and funnel propped in place. I've also added the bits that go between the smokebox saddle and the cylinders since the last post. Just out of interest can someone tell me what are those called?
![Image](http://i358.photobucket.com/albums/oo30/a3000inperil/P1180476.jpg)
-
Killian Keane
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 194
- Joined: Wed Nov 16, 2016 9:17 pm
Post
by Killian Keane » Tue Apr 04, 2017 7:14 pm
I think you are referring to the smokebox saddle
Blokes with tea can build anything
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Thu Apr 13, 2017 8:47 pm
Not the best of pictures but more progress has been made, it's been a rivetting couple of days
![P1180522.JPG](./download/file.php?id=162&sid=02247429fbfd56a5362835ff6ba99eb9)
- P1180522.JPG (617.52 KiB) Viewed 13399 times
Next job is to turn the dome which will happen sometime next week all being well...
-
Killian Keane
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 194
- Joined: Wed Nov 16, 2016 9:17 pm
Post
by Killian Keane » Thu Apr 13, 2017 8:50 pm
Looks remarkably accurate!
![:thumbright: :thumbright:](./images/smilies/icon_thumleft.gif)
Blokes with tea can build anything
-
ge_rik
- Administrator
![Administrator Administrator](./images/ranks/bowler.jpg)
- Posts: 6582
- Joined: Sun Oct 25, 2009 10:20 pm
- Location: Cheshire
-
Contact:
Post
by ge_rik » Fri Apr 14, 2017 8:11 am
Great looking loco already.
Rik
-
JCSteam
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 115
- Joined: Thu Aug 18, 2016 6:52 pm
- Location: Darlington
Post
by JCSteam » Mon Apr 17, 2017 3:01 pm
This has shaped up really well
Look forward to seeing the finished article
![;)](./images/smilies/icon_wink.gif)
Jon
Have fun steaming
Now put the kettle on....sit back and browse my webpage
http://fwpl.webs.com/
-
pskipper
- Trainee Fireman
![Trainee Fireman Trainee Fireman](./images/ranks/flatcap.jpg)
- Posts: 141
- Joined: Sat Nov 23, 2013 5:38 pm
- Location: Lincolnshire
Post
by pskipper » Wed Jun 14, 2017 8:23 pm
Dome turning went a little wrong as I cut the boiler curve a bit too high resulting in a shortened dome. However I still had enough of the PVC bar to make a second dome so that was okay. I've finished off the cab roof with a bit more bracing than a real Wren and sprayed a coat of primer on to see where I needed any remedial filler work. It was at this point that I realised I hadn't made the cap for the water tank which is why it is unpainted. Loco is being inspected by Mr Thompson who, following a little surgery to his arm and filling in the hole in his back, will be the driver.
I was going to make some discs to blank out the wheel spokes and make them more wren like but I'm keen to move on to some other projects so I'll get it painted and they can wait for some time in the future.
-
Peter Butler
- Driver
![Driver Driver](./images/ranks/reghandle.jpg)
- Posts: 5249
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Post
by Peter Butler » Wed Jun 14, 2017 10:21 pm
I think it is amazing what a little grey primer can do to a mixed media model..... everything suddenly fits together and looks so right.
Well done on this construction, very nice job.
The best things in life are free.... so why am I doing this?
Who is online
Users browsing this forum: No registered users and 2 guests