Toddler powered
Toddler powered
Our eldest (3yo in a week) wants a train he can BRUM for the garden railway when the track goes down. Several hours later of chopping up a cheap postman pat Greendale Rocket we have this...
An original next to it for comparrison
side view
An original next to it for comparrison
side view
Coincidentally, I was in a B&M shop yesterday and was tempted by an offer they had on a set which included the loco, a coach and a post van.
http://www.bmstores.co.uk/products/post ... ket-271330
I was thinking it might make an interesting bash. In some ways it was a good job I didn't see this thread until today - I already have about half a dozen unfinished projects on the go........
Rik
http://www.bmstores.co.uk/products/post ... ket-271330
I was thinking it might make an interesting bash. In some ways it was a good job I didn't see this thread until today - I already have about half a dozen unfinished projects on the go........
Rik
I've got the post van and coach to convert next. The post van is getting extended into a guards van. Oh and repairing the centre buffer and buffer beam which snapped due to some excessively excited play!
An HGLW chassis probably would fit (the boiler is pretty hollow) but finding somewhere to put a battery pack might be a challenge. As it was I didn't need to worry as I was under orders by the little one to make it a push along train so some re-gauged LGB wheels I picked up at the Lincoln show made it very easy.
An HGLW chassis probably would fit (the boiler is pretty hollow) but finding somewhere to put a battery pack might be a challenge. As it was I didn't need to worry as I was under orders by the little one to make it a push along train so some re-gauged LGB wheels I picked up at the Lincoln show made it very easy.
- DaveWatkins
- Cleaner
- Posts: 86
- Joined: Wed Nov 10, 2010 1:06 am
- Location: UK Midlands
- Contact:
I got a Greendale Rocket from B & M just before Christmas and have been converting the coaches and then the loco to 32mm gauge.
I used a spare Novo/Big Big train chassis. The photo was taken before I wired the chassis up. I have used the original battery box hacked out from the loco fames. It fits in the back of the cab.
It ran ok for a while but the batteries that came with the loco were almost flat before it had made a circuit of the line.
I used a spare Novo/Big Big train chassis. The photo was taken before I wired the chassis up. I have used the original battery box hacked out from the loco fames. It fits in the back of the cab.
It ran ok for a while but the batteries that came with the loco were almost flat before it had made a circuit of the line.
Dave
- DaveWatkins
- Cleaner
- Posts: 86
- Joined: Wed Nov 10, 2010 1:06 am
- Location: UK Midlands
- Contact:
- Superbiker_uk
- Fireman
- Posts: 371
- Joined: Wed Apr 01, 2009 7:36 am
- Peter Butler
- Driver
- Posts: 5404
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
I've just bought the friction drive version and have an HGLW chassis to hand as I'm building one of his diesels. If someone could tell me how to separate the chassis from the body without breaking something I'll answer that question!sstjc:107447 wrote:Very good. I wonder if an HGLW power chaissis would fit under that body.
- DaveWatkins
- Cleaner
- Posts: 86
- Joined: Wed Nov 10, 2010 1:06 am
- Location: UK Midlands
- Contact:
The body is held together by screws. Three are obvious. One more is hidden behind the GR plate on the right hand side. Two hold the smokebox and are hidden behind the curved Greendale Rocket plate. Taking the smokebox off reveals yet another two screws.
At this stage you find that the cab roof is glued on but you can now ease the two halves of the body apart sufficiently to take the chassis out.
The photo shows the version with motor powered wheels and sound. The friction drive version is similar.
Dave
I had been considering the HGLW chassis with a pony truck to balance it out, that might happen in the future when push along becomes less fun All look very good and I'm impressed at the people who have managed to get the plastic bits off without breaking them, mine was pre-loved and they had been epoxy'd back on at some point hence the filler job to get rid of the gaps .
HGLW Chassis
Just a follow up to the HGLW chassis. As standard we supply a 2 cell AA battery holder, but if you want we can supply a 2 cell AAA battery holder in its place. Just let us know when you place an order.
We have both sizes in stock.
Regards,
David H.
We have both sizes in stock.
Regards,
David H.
See www.hglw.co.uk
I decided on an IP Engineering budget chassis in the end - seeing how simple it was has decided me to make my own in the future. The wagons have been made bomb proof (hopefully) as my grandson is only 28 months old. Colour scheme of the wagons suggested by his 5 year old cousin! The battery is going to have to go on the floor of the cab.
Who is online
Users browsing this forum: No registered users and 1 guest